Manufacturer-led approach
New systems, refurbishment, service and parts are reviewed within one engineering and manufacturing workflow.
KOŞU GRUP LIFTING SYSTEMS
Crane and Hoist Spare Parts
For spare-part requests, system type, brand/model, capacity, serial data, photographs and dimensions are reviewed to target the correct match.
01
Selection data
Rated load alone is not enough; load geometry, motions, duty, headroom and site conditions are reviewed together.
Explore technical path 02Configuration and manufacture
Product family, motions, controls and project requirements are defined within the engineering scope.
Explore technical path 03Installation and commissioning
Mechanical arrangement, power, controls and functional checks are part of the site plan.
Explore technical path 04Service continuity
Maintenance, breakdown and parts requirements are not separated from product selection.
Explore technical pathREAL EVIDENCE LAYERCrane & Hoist Mechanical Parts Machining and Reconditioning Workshop
Workshop and field footage, technical content and service routes are connected within one information architecture.
KOŞU GRUP TECHNICAL DECISION CENTRE
Clarify product selection, faults, refurbishment and technical enquiries in one flow.
Use short questions to reach the right product or service family and transfer the result into a technical enquiry. It provides verifiable preliminary engineering direction, not a final calculation.
01
Crane & hoist pre-selection engine
Use capacity, motion, duty, headroom and environment to identify the first product family.
02
From symptom to a safe technical route
Connects the symptom to the right service and part family without remote repair instructions.
03
Repair, overhaul, modernise or renew?
Prioritises the route using recurring faults, parts availability, control technology and changed process needs rather than age alone.
04
Prepare one structured technical enquiry
Turns the core data required for first review into one structured WhatsApp message.
PRODUCT OVERVIEW
Select the system by operating scenario, not just product name.
For spare-part requests, system type, brand/model, capacity, serial data, photographs and dimensions are reviewed to target the correct match.
The correct configuration is not determined by rated load alone. Load geometry, centre of gravity, cycle count, lifting distance, horizontal travel, environment and service access should be reviewed in one technical picture.
KEY FEATURES
Hook and rope components
Brake, limit and control elements
Wheel, gearbox and motor components
Matching through photos and technical data
DESCRIBE THE REQUIREMENT CLEARLY
The same requirement may be described in different terms.
These phrases may describe the same technical requirement. Relevant links lead to the most useful selection, pricing, service, parts or fault page.
Part matching uses make/model, nameplate, dimensions, connection type, photos and equipment operating data.
APPLICATIONS
The right arrangement for the process.
01
Planned maintenance
02
Breakdown repair
03
Modernisation
04
Critical spares stock
ENGINEERING DECISIONS
What we clarify before quotation.
Clear definition of capacity, duty and site conditions supports better decisions for both investment and service life.
Capacity
Maximum and typical load, allowance and load geometry.
Motion
Speed needs for lifting, bridge, trolley and slewing.
Site
Span, level, power, structure, floor and environment.
Operation
Shift, cycle, operator and maintenance scenario.
RELATED SYSTEMS
Alternative technical paths for the same need.
LIFTING SYSTEM
Electric Chain Hoist
Industrial electric chain hoist for workstation, monorail and crane applications, selected by load, lift height, duty, trolley arrangement and site conditions.
Explore
LIFTING SYSTEM
Electric Wire Rope Hoist
Electric wire rope hoist for industrial crane systems, engineered around load, speed, duty class, hook approach, trolley layout and maintenance access.
Explore
LIFTING SYSTEM
Monorail Crane & Hoist System
Monorail crane and hoist systems engineered around runway route, suspension points, curves, electrification, load flow and process access.
ExploreFREQUENTLY ASKED QUESTIONS
Short answers specific to this page context.
01What information is required for a crane or hoist quotation?+
Maximum load, lifting height, horizontal travel, span, operating frequency, power supply, site photographs and installation location help determine the correct system.
02Can a quotation be prepared without a site survey?+
A preliminary quotation can be prepared from basic data. A site survey is recommended when the supporting structure, runway, floor, power or installation conditions affect the project.
03Do you provide maintenance and repair for existing cranes?+
The scope is technically reviewed after receiving the system type, capacity, brand/model, fault symptoms and site location.
04How are spare parts matched?+
Labels, serial data, capacity, photographs, dimensions and connection details are used to identify a suitable part.
05Do you support projects across Türkiye?+
Manufacturing and service coordination from Istanbul is planned across Türkiye according to project scope, schedule and location.
06Does Koşu Grup serve all of Türkiye?+
Yes. Project data can be collected remotely, while manufacturing, shipping, installation and service are planned nationwide according to scope and site conditions.
07Does Koşu Grup manufacture for international projects?+
International manufacturing and project enquiries are accepted. Country, power supply, site dimensions, delivery model, installation and documentation are clarified during quotation.
08Do calculator results constitute engineering approval?+
No. The tools prepare enquiry data. Capacity, structure, duty class, dynamic effects and safety require authorised engineering verification.
09What faults are covered by 24/7 technical service?+
Initial assessment and service coordination cover hoists, bridge and gantry cranes, controls, brakes, limits, motors, travel, power feeds, chain/rope and spare-part faults.
10Which photos help an RFQ?+
Equipment labels, full system, runway/beam, hook area, panel, pendant, fault point and safe-distance site views accelerate assessment.
11How is crane maintenance frequency defined?+
Manufacturer instructions, use intensity, environment, load spectrum, fault history and legal requirements are reviewed together.
12Can an old crane be modernised?+
A scope can be defined after reviewing structure, mechanics, brakes, limits, controls, motors, gearboxes, power supply and spares availability.
13How are spare parts identified?+
Make/model, serial and capacity labels, dimensions, connectors, mounting, photos and existing part codes are compared together.
CRANE & HOIST PARTS
Part matching should be based on equipment identity and interfaces, not visual similarity.
Brakes, contactors, motors, gearboxes, limits, controls, busbar/festoon, wheels, rope guides, chains, wire ropes and hook components are matched using nameplate data, dimensions, voltage, connection details and photos. Supply, overhaul or manufacturing options are confirmed against the actual requirement.
Equipment make/model, serial, capacity and existing part marking.
Critical dimensions, shaft/holes, voltage and connection interface.
Clear photos of the part, label and installation position.
Send part identification dataPreliminary guidance does not replace engineering verification; equipment and site data are confirmed for the project.
LET’S DISCUSS YOUR PROJECT
Share your experience